Old Rusty m1008
New member
- 23
- 0
- 0
- Location
- Sayreville NJ
OK I need help with the electrical system. Ive read the tms and the schematic and frankly it confuses me. I need help where to run the wire that probably has a short
I have the truck with a new glow plug card. I bought the truck there was a cut on the yellow line on the temp sensor on the manifold I replaced this with a new sensor and wire from advanced auto parts that corresponded to the NAPA number
My buddy checked the temp sensor and there is 10.5 volts to the sensor while truck is cold
there is no power to the glow plugs themselves but there is power to the card (12V) and there is power to the relay (12V) the wait light does not come on but my buddy jumped that with the card out and it does work if power is sent up there
the wiring looks ok and this truck did have other electrical issues we had to do the doghead mod to the starter and replace the starter and the one alternator, Once I get her running she is great its the start up th at creates the problem
I have the truck with a new glow plug card. I bought the truck there was a cut on the yellow line on the temp sensor on the manifold I replaced this with a new sensor and wire from advanced auto parts that corresponded to the NAPA number
My buddy checked the temp sensor and there is 10.5 volts to the sensor while truck is cold
there is no power to the glow plugs themselves but there is power to the card (12V) and there is power to the relay (12V) the wait light does not come on but my buddy jumped that with the card out and it does work if power is sent up there
the wiring looks ok and this truck did have other electrical issues we had to do the doghead mod to the starter and replace the starter and the one alternator, Once I get her running she is great its the start up th at creates the problem