Sephirothq
Well-known member
- 1,423
- 26
- 48
- Location
- Trevorton / PA
Does the 250 cummins in the M818 have an 1-1/2" plug in the back above the bellhousing for a block heater?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
cummins 250 heater?
- Thread starter Sephirothq
- Start date
- 12,195
- 325
- 0
- Location
- gainesville, ga.
that would be hard to get to, instead use one of the water jacket removable covers on the side
- 9,580
- 218
- 63
- Location
- Dickson,TN
Ron is right. All the Cummins I've ever seen Have the heater in the cover. You should be able to get it at any place that sells big truck parts. Just tell them you want a block heater for a 855cid. Cummins.
- 8,539
- 2,760
- 113
- Location
- Monrovia, Ca.
The big plug in the rear of the block is for aftercooler plumbing.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
i got my block heater off ebay
Sephirothq
Well-known member
- 1,423
- 26
- 48
- Location
- Trevorton / PA
I have a block heater already for the back plug if it will work, so i wouldn't have to buy anything. I just didn't know if it would work or not. It sounds like it would but just a problem to install??
jwaller
Active member
- 3,724
- 19
- 38
- Location
- Columbia, SC
the back plug is not going to heat anything but the back head. the front of the motor will still be cold. get the plate heater they work better and more evenly heat the motor. they are 1200 watts. if you need you can install 2 of them.