• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Damaged PDP 1083

S

S&S EVT

New member
Steel Soldiers Supporter
1
0
1
Location
Wichita Falls Tx
I have a M1083A1 with a damaged PDP. Do any of you know where I can have mine repaired or are there any available to buy? The number printed on mine is 12422367.
 
R

Ronmar

Well-known member
4,424
8,326
113
Location
Port angeles wa
Green circuit board type power panel? look around your area for a Amature Radio club. I suspect your local county emergency management department is associated with an amature radio club or ARES(Amature Radeo Emergency Response) group. i suspect they will have a member or two who can repair the circuit board traces... Circuit board traces are not fantastic at carrying high electrical currents, that's why those panels must NEVER be over-fused...
 
G

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,529
6,137
113
Location
Portland, OR
Pictures? It's a pretty simple board. I replaced a diode in one recently with good success. The diagrams actually even had the diode part numbers so was no guessing of size or specs. Restored the starter button operation so I could delete the previous owners bypass wiring running up the steering column.
 
You must log in or register to reply here.
114,103members
167,071threads
2,352,247posts
2,904online users
Top