m1010freedom
Member
- 43
- 0
- 6
- Location
- manhattan beach CA
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
99% sure you have to pull the pump again. You have to pull the tube off to get to the gear bolts anyway. You can knock it out in 4 hours or less.Is there a reason i cant just pull the oil fill tube and then push it straight in from there??![]()
Yes the reason it is not possible. It fits very snug in the pump and sits lower than the access hole. It will cause a premature IP failure if not installed.Is there a reason i cant just pull the oil fill tube and then push it straight in from there??![]()