WildernessJeep
Active member
- 187
- 89
- 28
- Location
- Huntsville, Texas
While my truck is awaiting a new cylinder, I was reading the TM's and found that many M939 series trucks have a "deep water fording kit", with a lever on the dash to activate the deep water kit. Apparently it blows vent tubes with positive pressure while in deep water. My M936 came with a deep water snorkle (I think they all do), but I don't see the deep water lever anywhere on the dash. Would a guru please sort it out for me? Do I need to add the rest of the kit, including the dash switch, or does the M936 already have the kit installed and automatic? I live in the Houston area, so I suspect deep water (not over the hood) is in the truck's future.
![Capture.JPG Capture.JPG](https://www.steelsoldiers.com/data/attachments/555/555024-bd176180d4b9c19e2489b400f6e5f100.jpg)
Also, a picture (from this website!!!) for attention::
![IMG_1297.jpg IMG_1297.jpg](https://www.steelsoldiers.com/data/attachments/555/555023-6ee45b2af4db7a91234b378723327f45.jpg)
![Capture.JPG Capture.JPG](https://www.steelsoldiers.com/data/attachments/555/555024-bd176180d4b9c19e2489b400f6e5f100.jpg)
Also, a picture (from this website!!!) for attention::
![IMG_1297.jpg IMG_1297.jpg](https://www.steelsoldiers.com/data/attachments/555/555023-6ee45b2af4db7a91234b378723327f45.jpg)