DENTON NC Buy/Sell Thread 2022

[Oxyacetylene]

Can someone give the date / time / location of the Denton event here too?

April 23-24 are the official dates, although most folks will be there on Friday at least, with several coming on Wed or Thurs. The 23rd and 24th are open to the public. The address is Denton Farmpark, 1072 Cranford Rd, Denton NC 27239.

 

[Ferroequinologist]

Ah so.

Most events get two threads, as the for sale/wanted posts can clutter up the event thread and have people search through all the post to find out info.

 

[Blake]

I am planning on attending and can bring if there is any interest:

NOS autolite waterproof spark plugs (2245) for your stock m151, m37, m38, m38a1.... Made in USA: $25 each
PRC 25 with AM2060 power supply: $350
M116A2 trailer with MEP-003 diesel 10KW generator. New fuel filters. Engine is brand new, less than 1 hour run time with paperwork (I installed new from crate). No trailer title. Civilian taillights and RV light plug: $3500
1.5KW military gasoline generator. 120/240. Runs: $250
M16 rifle storage rack, aluminum, used: $100
Military light set in footlocker with cords/sockets: $100
Large military snatch block with loop on top: $125
M1008 CUCV Gas tank complete, used

 

[MattNC]

I have a set of centramatic balancers for a hmmwv. They have probably 4000 miles on them before I switched to aftermarket wheels and tires. I paid $250, listing at $150.

 

[Ferroequinologist]

I am planning on attending and can bring if there is any interest:

NOS autolite waterproof spark plugs (2245) for your stock m151, m37, m38, m38a1.... Made in USA: $25 each
PRC 25 with AM2060 power supply: $350
M116A2 trailer with MEP-003 diesel 10KW generator. New fuel filters. Engine is brand new, less than 1 hour run time with paperwork (I installed new from crate). No trailer title. Civilian taillights and RV light plug: $3500
1.5KW military gasoline generator. 120/240. Runs: $250
M16 rifle storage rack, aluminum, used: $100
Military light set in footlocker with cords/sockets: $100
Large military snatch block with loop on top: $125
M1008 CUCV Gas tank complete, used

Hey Blake, what are you asking for the m1008 tank?

Also, did you change your dash out yet? I'm still interested in your old one.

 

[Greg2016]

Im planning on attending the 2022 denton event and i am in need of two B pillars for hmmwv M998

 

[Greg2016]

I have a set of centramatic balancers for a hmmwv. They have probably 4000 miles on them before I switched to aftermarket wheels and tires. I paid $250, listing at $150.

 

[SCSG-G4]

• Field desk, possibly.

Coleman's used to have them, but the only ones I see on evil-bay are $500 plus shipping. Want this one for $250? If I don't get there, I'll send by Adam and in any case I'll try to have it near Cabell's MKT so it can be found easily.

 

[Oxyacetylene]

Coleman's used to have them, but the only ones I see on evil-bay are $500 plus shipping. Want this one for $250? If I don't get there, I'll send by Adam and in any case I'll try to have it near Cabell's MKT so it can be found easily.

Looks to be in good condition. Is that just cracking paint on the bottom of the desk surface? As long as it's in good condition then send it on. I am thinking one of those would make a decent work area for the enclosure.

 

[Recovry4x4]

So, I'm going to offer up a few heavier goods from Microjeeps collection. This stuff must have a firm commitment before I'll load it. 3 command post tents. One I doesn't have walls, one does and the 3rd one is unused. I have not put my eyes on the NOS poleset but I'm sure I'll find it. Prices will be $450 for no walls, $750 for used with walls and $950 for NOS. Also have an M416 trailer. Was freshened up by Zout for Papabear along with the M151A2. This trailer has a replacement back panel. $1500. There is also a Converto trailer. Probably restorable but looks like it's been sitting since the Viet Nam conflict. $450. I'll do my best to figure all this stuff out but I'll be going back and forth to ATL a bunch, my sister in law just got a new kidney. All praise be to God. There is so much stuff to go through.

 

[SCSG-G4]

Looks to be in good condition. Is that just cracking paint on the bottom of the desk surface? As long as it's in good condition then send it on. I am thinking one of those would make a decent work area for the enclosure.

Yes, it's mainly cracking paint. I'll look for the key to the lock.

 

[AFGVET]

I could use a CUCV dipstick as well as the other items.

 

[nayrbrellim]

Looking for seats for m900 series 5 ton, anything other than the stock seats. Have thought about just keeping the spring ride and putting something like a commanders seat in it and putting a bucket seat on top of the battery box.

Also, looking for bows and cover for the M105 trailer bed that I have on my bobbed 5 ton.

Looking forward to seeing everybody at Denton.

thanks

 

[jkcondrey]

I have an 1152 parts truck with many items available on it. Can’t guarantee I can get everything off in time but I can do so before and after Denton. I do have a booster for an REV truck I got by mistake. NOS, orange studs on master cylinder side. 200$ obo. 998 front drive shaft, NoS, but front grease fitting on slip joint needs repair, 40$ obo. Will only be down Saturday. I’m looking for two front soft doors, green or camo for hmmwv. PM me for anything. Thanks
Joe

 

[art]

For Sale:

Frame for Crew Tent, Complete, with Bag & Spare Parts $75 - Sold


2 End Sections, (vinyl) -New in Box- for 16 x 16 Expandable Frame tent


Mermites, -(Insulated Food Container), Parts & Complete

PadLock Sets, Keyed alike
Thanks
Art

 

[Oxyacetylene]

For Sale:

Frame for Crew Tent, Complete, with Bag & Spare Parts $75
View attachment 864985 View attachment 864986

2 End Sections, (vinyl) -New in Box- for 16 x 16 Expandable Frame tent
View attachment 864984 View attachment 864987View attachment 864991 View attachment 864990

Mermites, -(Insulated Food Container), Parts & Complete

PadLock Sets, Keyed alike
Thanks
Art

How much for a padlock set?

 

[TacMac2012]

I am bringing various LMTV and HMMWV parts. Not sure what I will load up between now and when I leave though. I have a LWS if anyone wants one, may bring it regardless.

New in crate IbisTek tow bar with all accessories $1,000
NEW Max Ax kits (ax, shovel, etc). $150 each (qty 6-
NEW 12 ton hi-range bottle jacks (part number D-51014 if you want to look them up on eBay) $120 each (qty 8-10)
Scepter Fuel cans $60/ea (qty 5-10?)
NOS HMMWV CV shafts (not sure I will bring them all)
Also bringing the Harley Davidson MT500, against my better judgement I have decided to put it for sale. I just don't need 4 motorcycles! Need to sell two....

Who knows what else. I will be driving the MTVR dump truck/tag trailer.

 

[art]

How much for a padlock set?

Pm sent

 

[TacMac2012]

As usual I am bringing WAAAY more than I had planned, but I am loaded up aside from some of the camping gear.

 

[nayrbrellim]

does anybody have a slave cable port cover? I found one on the internet but was like $45 or something like that, just need the little cap that goes over the slave cable connection - thanks