Desplined M35 Hubs

[tklm539]

Rather than go with the cost of lockouts, I am thinking of just desplining a set of hubs. I did a search but could not find a "how to" post. Is desplining a simple task that could be explained or am I wishfully hoping?

Also, is there a good source for an extra set.

Thanks

Tom

 

[builder77]

Unless you have access to a lathe or mill this is not a DIY project from what I have seen. Nothing hard about it with the right tools though.

This is all the How-to you need though.
http://steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=1144&highlight=desplined+hubs

 

[WillWagner]

Tried the DIY method, very time consuming. Then a friend called me, and at that moment, I remembered that he owns a machine shop....DOH! Took the hubs there, in about 5 mins he had both done. Even made the one I had attempted to do looking good!

 

[rdixiemiller]

Nothing like the right tools.......

 

[WillWagner]

A die grinder isn't the right tool

 

[CCATLETT1984]

a lathe would be best.

 

[acetomatoco]

remember to carry a 1/2 drive speeder and the proper socket and the unmolested hubs in your glove box...just in case...no power tools needed... ACE