DEUCE EMMISIONS RESULTS ARE IN!!

[No.2Diesel]

Hi,

As requested here is the emmisions test result from my first inspection with the deuce. This printout is required to be carried with registration and insurance per NYSDOT. When the mechanic put the "heavy vehicle" inspection sticker on the truck, he placed it on the bottom of the front fender. He says he does this because fleet owners have been swapping bumpers.

Here are the test reults as they appear:



Test Date: 10-06-06 Test Time: 13:28:14

Meter Mfg. Red Mountain Engineering Inc.
S/N: 6362916 Model: Smoke Check 1667
Software Version: 3.71PNYR

Tested by: LUCAS
Veh. ID: NK01F7....
Year & Make: 1972AMGE
Vehicle Mileage: 45294
Year of Engine: 1972
Engine Mfg: WHITE
Engine HP: ES

Ambient Temp: 59.5° F
Baro. Press: 30.24in.Hg.
Rel. Humidity: 48.2%

Engine Oil Temp: 65.60° C
70° C Minimum Oil Temp for Valid Test

Visual Inspection.........OK

*****OFFICIAL OPACITY TEST RESULTS*******

Test# Peak% Corrected Peak%
1 3.61 3.61
2 3.52 3.52
3 5.07 5.07

Results Corrected for Ambient Conditions

Peak Opacity Difference: 1.55
Difference Within Spec
Test is VALID

3 TEST AVERAGE OPACITY....................4.07%

Max. Limit - Engines 1973 and Older: 70%
Oil Temp Above 70° C...................FAIL
Zero-Drift Check.........................PASS
*******************************************
TEST RESULTS: ***PASS***
*******************************************

Last Calibrated On: 09-01-06 12:56:41
Calibration Filter: 49.4%

Inspector's Signature

___________________________________________

 

[cranetruck]

So this is an opacity test only, nothing about pollutants, NOX etc, perhaps too complicated a test.
Thanks for the info!

 

[No.2Diesel]

Yeah that was it. 4% out of a max. allowed of 70% ain't bad.

No dyno or rollers. Just an anal probe down the dipstick tube and a device clamped to the stack. He brought up the RPMs with no load. Obviously the diesel emmisions test isn't that strict.