- 158
- 162
- 43
- Location
- Hills of / TN
Guys Ive searched and swore there was a post on changing the Deuce fan out and putting a Duramax fan in its place. Anyone done this ? I cant find the post.. Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Deuce Fan mod/ upgrade
- Thread starter SteelNinja
- Start date
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
The fan on a D-Max turns opposite engine rotation, wrong way for a deuce.
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
This?
Nylon Radiator Fan?
Has anyone "upgraded" to a nylon fan? There are some on FleaBay for sale for $125. I wouldn't mind using it alone or along with the thermal fan clutch mod this summer.
www.steelsoldiers.com
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
I used a synthetic generic fan from Summit with very satisfactory results. Much less rotating mass and no danger of a fan blade massacring the radiator.
Sent from my SM-G991W using Tapatalk
Sent from my SM-G991W using Tapatalk
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
I wouldn't say no chance, seen plenty of them crack then fail horribly. I had one explode on the dyno, took out the radiator, upper and lower hoses, shroud and a mess of wiring. Had the hood have been closed, pieces parts woulda put holes in the fiberglass hood. Dam thing took out my coffee cup I had on the bench 6 feet away!
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
DaneGer21
Well-known member
- 614
- 1,162
- 93
- Location
- Creston, Ohio
Would you happen to have a part number? Just curious
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
Steel and aluminum bend when they strike things, yes, sometimes the radiator core gets damaged. Plastic/nylon, once compromised, come apart. On the other hand, I have seen trucks come in with cracked/broken composite fans that when the customer was notified, they just said, yeah, it's been like that for years.
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
Here is the original thread with the summit part number. 20" fan. The blades are soft enough to be trimmed with scissors if there is fine tuning required.
SERVICE BULLETIN: M35A3 Self-Destructed Radiator Fan Threw Blades
To the M35A3 owners, my truck turned 25 years old and the plastic fan came apart. I was lucky and did not lose my radiator. For piece of mind, replace your fan.
www.steelsoldiers.com
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
I bought a DRMO M37 years ago with a single stock fan blade sticking out of the hood...
Guess they decided not to fix it at all.
Guess they decided not to fix it at all.
- 158
- 162
- 43
- Location
- Hills of / TN
That was my thought Thanks
- 158
- 162
- 43
- Location
- Hills of / TN
A composite fan mounted on a clutch-type mount would be nice! I wouldn't intentionally go thru 4-5 ft of water or whatever - so/ but if someone did I would think the clutch may slow it down or maybe stop it from breaking?? I was watching a video when back in the ( maybe 1960's) the military drove the deuce across a river over the cab , What fan would they be using ? i guess the Gov has plenty of funds to fix it tho..
- 158
- 162
- 43
- Location
- Hills of / TN
- 158
- 162
- 43
- Location
- Hills of / TN
The deuce fan is a clockwise rotation correct?
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
It turns the same way as the engine turns. D-Max fan turns opposite engine rotation.
- 242
- 26
- 28
- Location
- Live Oak, Florida, USA
I found the following years ago:
"Can use a fan clutch off a 1996 F-350. Need 1 ½” set collar welded to the fan hub. Also, longer bolts are needed. Trim new blades to the same diameter as the original blades."
I hope this may help. I could use one of these blade-clutches if you find a couple.
DB556
Active member
- 200
- 129
- 43
- Location
- Ambridge, Pa
A 96' F-350 so that would probably be a early 7.3 powerstroke, guess ill have to look into that.
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
Or a gasser, IIRC they had 460s in the std and dually .I am unsure if the fan clutch is directional.
oddshot
Active member
- 781
- 119
- 43
- Location
- Jasper, Georgia
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
KW W900 with a 15l 550 hp Cummins in it. Fans are overdriven so are spinning 1.5 or so faster than the engine.DANG!!!!!I wouldn't have thought you could get a LDT-465 to rev that high.