The front and rear hub assemblies are the same - FSN 10896708, Wheel, Hub, Vehicular. The wheel bearings are the same front/rear. The inner bearing (cone) is a #3994, the outer bearing (cone) is a #320, the cup (raceway) is the same inner/outer/front/rear, #3920. The wheel seals are a different animal. There is a listing in the parts cross list for a front wheel seal national 471463 or cr18972, not clear if this inner or outer seal, but I suspect it is the outer seal. There was a recent posting about the inner seals, it is a strange animal because the seal itself is retained in a large outer plate. Most folks have bought the entire plate and seal assembly from MV parts suppliers, but the poster was able to remove the plate assembly and found a replacement seal to replace the seal itself without replacing the entire plate assembly. Search the past 2 or 3 pages of postings for more info.
