• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce Re-Inspection Question

Tinwoodsman

Well-known member
Steel Soldiers Supporter
3,923
76
48
Location
Comfort, Texas
I rechecking a deuce tomorrow that I am hoping to purchase. When I first test drove it, the air pressure buzzer did not come on when I turned on the switch. I will look at the pressure gauge but want to know if there is another way to check to see if the system is pressurizing?
 

coyotegray

Member
492
10
18
Location
Oklahoma City
Drain the air tanks. It will show the system is pressurized and should drop the pressure so you can see if the buzzer/gauge work.. The buzzer won't come on every time you flip the switch, only if the pressure is below 60lb.

This is somewhat academic. If you drove it and you were able to stop, it was pressurized.. :neutral:
Andy..
 
Last edited:

Tinwoodsman

Well-known member
Steel Soldiers Supporter
3,923
76
48
Location
Comfort, Texas
Cleared the air tanks and the buzzer went off as soon as I turned on the switch. Held a steady 95 to 100 psi during my test drive. :driver:
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks