• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce trailer brake controller?

TaylorTradingCo

Active member
586
68
28
Location
Ringgold, GA
I just picked up a 1957 Reo shop van today at Forest Park, GA and it has something I have never seen before on the steering column. Unfortunately the nameplate has been painted over and I can't read what it says.

As I was chaining her down :oops: I ran across something else up under her rear.

I have attached pictures of them both, LOL :wink:.

It looks to me to be some kind of adjustable trailer brake controller. It is tied into both the brake lines and trailer wiring harness.

Has anyone got one of these that works? The steering column part does not have any wires plugged into it. If that is what it is I would like to try to make it operational.

Oh yeah, it also has the electronic keypad for the light switches. My first one of them.

Derek Taylor
 

Attachments

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,135
113
Location
Athens, Ga.
You were about 15 minutes from my office today!
 

jwaller

Active member
3,724
19
38
Location
Columbia, SC
yup thats the electric trailer brake controller. not sure what trailer it's supposed to go with but I've seen in the back f the 24p's.
 

rosco

Active member
Steel Soldiers Supporter
2,102
30
38
Location
Delta Junction, Alaska
Back in the old days, they had some "mostly conventional" trailers. That thing on the steering column is a reiostate to control the supply of juice to the electric brakes. I came across a couple of them over the years. I used one to control & adjust 24v to run 12v lights.

Lee in Alaska
 
Top