Deuce wheel cylinders

[clayne2014]

I am trying to replace all 6 wheel cylinders on my new 1971 AM General M109. What are some good resources for locating and pricing these parts? Appreciate all the help!

 

[pat038536]

You could try NAPA. Bring the part with you and they can either match by the casting number, or by visual matching.

 

[phil2968]

https://docs.google.com/spreadsheet/lv?key=0AoJuiPMjMpsVdEZxUEc2WlFuUHY5MlloS2VMYXlTQlE
All the part numbers and where to get them. This is a sticky thread at the top of the deuce forum.

 

[deuceman51]

I stock tons of deuce parts, PM Sent!

 

[doghead]

Any of the paid vendors ads that show up at the top of the display.

PartsTMs, Google NSN or part numbers.

 

[DeucesWild11]

You can try Erik's Military Surplus (I bought my rebuild kits from them) Also White owl, eastern surplus, Deuceman (above) etc. etc.. Should be plenty of sources out there for you..

 

[brianp454]

As said above, peashooter and others have a great thread with lots of goo info on the brakes, parts, etc.

 

[clinto]

https://docs.google.com/spreadsheet/lv?key=0AoJuiPMjMpsVdEZxUEc2WlFuUHY5MlloS2VMYXlTQlE
All the part numbers and where to get them. This is a sticky thread at the top of the deuce forum.

I've bought half a dozen sets of the Napa wheel cylinders on that list and I've disassembled all of them and they are the correct units with expander springs.

 

[Chief_919]

I last time I needed some I got these from Amazon-- cheaper than anywhere else I found.

Since I got a Prime account and started looking I am amazed what a high percentage of parts I find on there at good prices.

 

[jetman10]

I bought a bunch off E-bay new, and they all had the banjo bolt thread tapped a little off angle to the copper gasket seating surface . Couldn't stop them from leaking . Had them too long to send back so I drilled and tapped the hole larger and used a elbow fitting with a pipe thread on the cylinder end and a brake fitting on the other . Worked good .

 

[peashooter]

yeah, theres a lot of brake system part numbers and brake line lengths/sizes/fittings HERE. Check post 3 for the cross reference and rebuild numbers

 

[hank]

i would like to replace all wheel cylinders on my Deuce. please advise to get me started.

 

[peashooter]

i would like to replace all wheel cylinders on my Deuce. please advise to get me started.

https://www.bigmikesmotorpool.com/c...s/six-wheel-cylinders-for-m35a2-m35a3-7348976