Deuce won't MOVE.

[m16ty]

You'll have to pull the trans to access the clutch. I don't know how heavy the trans is but you don't want to try and pull it by hand.

Sounds like you don't know a lot about changing clutches. I suggest you read the TM and understand what you are doing before you start turning wenches. It's not complicated but you've got to do things a certain way or you'll never get it done.

 

[Heavysteven]

Did you get it moved yet?

 

[k4vem4n]

http://www.steelsoldiers.com/deuce/52409-how-transmission-changeout.html?highlight=changing+transmission
Try this, once you do it once, you should understand it well enough to do it without instruction. It is a rather simple job to do in my opinion, except you are dealing with a lot of weight, I believe the trans weighs close to 300lb. get a good come-a-long or chain hoist. Plus the output shaft bolts are a PITA to get to, so patience is also a necessity.
The first time I did it took about 5 or 6 hours, the last time I did it, it only took just over an hour (by myself). Practice makes perfect.
Take your time, be safe, and good luck.

 

[ferb444]

Got the truck moved, had to tow it with a high lift. Looking under the truck the clutch feels real shakey. I push the clutch to the floor and i can shift into all 5 gears, including reverse. I'm going to read more about changing the clutch, Could it just be out of adjustment? how would you adjust the clutch? where can i get a new clutch? thanks again to everyone.

 

[steelandcanvas]

Download the TM's for your truck here: JATONKA's M35 TM download page
Your clutch can be found here: CLUTCH PARTS
Good Luck!

 

[73m819]

YOU REALLY need to read the TMs, like before owning the truck, I guess late is better then never
Start with the -10 (operators manual) and go from there.
You can find them here
JATONKAM35s HOME ON THE WEB

S&C you beat me to it

 

[steelandcanvas]

S&C you beat me to it

And I type sloooooow.

 

[73m819]

And I type sloooooow.

Apperently not as slooooooooooooooooooooooooow as I do

 

[nk14zp]

Ditto on R.T.F.M.

 

[G-Force]

Either the clutch is shot or the bolts on the pressure plate loosened up causing the clutch to not engage. Either way, you need a clutch.