acesneights1
Member
- 1,449
- 23
- 20
- Location
- CT
Title say it. Was wondering if they used any detachable gooseneck lowboys like a Rogers 35 ton and if so what would be the M classification?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Did the military use any detachable gooseneck trailer ?
- Thread starter acesneights1
- Start date
Derrickl112
Well-known member
- 2,654
- 84
- 63
- Location
- Southeast MI
.
Last edited:
MCS Dave
New member
- 2
- 0
- 0
- Location
- Concord, Ca
Can an M870A3 be pulled by a commercial tractor, if so what size king pin would be used?
MCS Dave
New member
- 2
- 0
- 0
- Location
- Concord, Ca
Thank you for the info. I'm not a truck driver but am trying to move some cargo for the Army. So would the 3' king pin be a show stopper for the commercial driver?
- 559
- 845
- 93
- Location
- Riverhead, NY
Yes unless they have a military or heavy duty 5th wheel. Commercial king pin size is 2".
- 2,672
- 2,220
- 113
- Location
- Sunman Indiana
Should have interchangeable 2” or 3-1/2” pins.
- 1,650
- 815
- 113
- Location
- Central NY
Also - M870's (A0, A1, A2, A3...) were matched to a 6x6 (or 8x
tractor which has a fifth wheel height approaching or above 60". They do adjust to a "civi" height fifth wheel (that's why they have interchangeable 2~3.5" king pins), so you will have to reset the locks to set the g-n to your truck height.
We will need pics!!!!!!!
tractor which has a fifth wheel height approaching or above 60". They do adjust to a "civi" height fifth wheel (that's why they have interchangeable 2~3.5" king pins), so you will have to reset the locks to set the g-n to your truck height.We will need pics!!!!!!!