• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Diesel pump transfer unit specs..?

islandguydon

Well-known member
3,724
783
113
Location
Michigan
I have already searched the TM's and searched HI & lo for the Tm for operating this pump unit. Can a guy get a little help please..?

EDIT:

I found the TM for this Fuel Pump Station. THe TM is: TM 10 4930-236-13&P

This is found half way down the PDF attached.
 

Attachments

Last edited:

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
The unit should have a data plate on it that tell you what TM is needed.

Then a google search of that number should find it.
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,810
742
113
Location
Liberty Hill, SC
I don't have the TM. I usually work off the 'I know what this part, this part, and this part do separately, so if I do this or that then the output should be this' method. Hasn't blown up or killed me... YET.

I have disassembled mine, as I plan to modify it and mount it with a pod on what's left of my MKT for a mobile fueling system.
 

6x6TRex

Member
261
2
16
Location
Flint, MI
I have the TMs for it, I'll post them up later tonight or tomorrow.

Edit: Don, do you know you already asked this question 4 months ago? :p
http://www.steelsoldiers.com/auxiliary-equipment/88049-fuel-station-pump-filter-question.html

I'll double check later to make sure but look for 4930-236-13&P for the pump system and beta tanks. TM 10-4330-232-12&P is suppose to have the parts breakdown for the filter.

Where I got the TMs from: http://www.steelsoldiers.com/auxiliary-equipment/84501-tm-beta-systems-500gal-tank-needed.html
 
Last edited:

islandguydon

Well-known member
3,724
783
113
Location
Michigan
I have the TM's for it, I'll post them up later tonight or tomorrow.

Edit: Don, do you know you already asked this question 4 months ago? :p
http://www.steelsoldiers.com/auxiliary-equipment/88049-fuel-station-pump-filter-question.html

I'll double check later to make sure but look for 4930-236-13&P for the pump system and beta tanks. TM 10-4330-232-12&P is suppose to have the parts breakdown for the filter.

Where I got the TM's from: http://www.steelsoldiers.com/auxiliary-equipment/84501-tm-beta-systems-500gal-tank-needed.html
6x6Trex and Ferro thanks..!

I got it a few months ago, My old computer fried, hence lost all the data, here is what the data plate says. Thanks for the help. I am mounting this pump in the back of an A3 with a 308 gallon transfer tank. I am going to use it for picking up ATF / UMO and mineral oil. Does anyone think I will have a problem with the suction with anything other than diesel..? I think the pump should be OK for a little bit heavier fluid. What do you think..?
 

Attachments

Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks