Diode identifcation help

[llong66]

Hello everyone. When removing my old motor, I found the connector pictured below with what appears to be a diode jumped between the two contacts. The connector comes out of the main harness accross the fire wall. I have been unable to find anything I think it might be looking through the TM schematics. It was taped over with duct tape.
Any help would be appreciated!

Thanks much!
Greg

 

[timarr]

That's the water in fuel diode on the engine bay side, another is in the cab its the gen2 diode.

 

[Warthog]

Agreed

Here is a thread I started 4 years ago:

http://www.steelsoldiers.com/showthread.php?50551-CUCV-Switches-Diodes-Relays

 

[llong66]

Thanks guys! Warthog, for some reason, I hadnt run accross that thread, but in the 2nd set of pics is exxactly what I have. I had looked through the TM schematics, but was looking for something a little les "jerry rigged_ lol I guess they just did what worked.

Thanks again!
Greg

 

[Warthog]

At the top of the CUCV page is a sticky call CUCV Helpfull Threads. A lot of good threads are posted there. Many by me over the years. This site has helped me many many times and I try to pay it forward.