DIY M101/M105 bow design

cloud9actual

New member
5
3
3
Location
Fort Worth, Texas
While I was searching for some factory trailer bows for my M101 A3 I decided to see what I could come up with for a DIY option. I found some bows locally so I don't have a huge need for this design anymore but I figured I'd see if anyone else would be interested in a kit like this. I decided to use some cedar 2x2s as my main structure and galvanized steel laser cut for the corners. I figure this design can be modified to fit other vehicles with hard to find bows.

Would love to get some feedback!
 

Attachments

tobyS

Well-known member
Steel Soldiers Supporter
4,674
450
83
Location
IN
Perhaps you could get a small arch built in. The flat tends to pond bad. A rib down the middle might help. It can't be too high but about anything would help.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks