- 3,923
- 76
- 48
- Location
- Comfort, Texas
I am disassembling my cab doors and I started by removing the glass. The 20 TM recommends marking the location of the regulator stop brackets before removing the glass. Unfortunately, my doors do not have all the brackets mentioned. The parts missing are shown by the orange arrow. They are missing on both doors and on one door, the channel the bracket screws to does not even have a hole for the stop bracket screw. See the attached document to see the missing part.
Also, it appears to me that these brackets can only be attached at one point so I do not know why the measurement is required. Any help is appreciated.
Also, it appears to me that these brackets can only be attached at one point so I do not know why the measurement is required. Any help is appreciated.
Attachments
-
62.5 KB Views: 80
-
47 KB Views: 26
Last edited: