-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Drive shaft yoke 915a1..???
- Thread starter reb87
- Start date
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
its not a military only part. I would take what you have left to the local truck place and I bet 100 bucks they can get you what you need.
Ord22
Member
- 571
- 4
- 18
- Location
- Stockbridge, Ga
it a common truck part. somebody will have it.
Reb,
Look at TPUB at following address.
2520-01-148-5970 Yoke, Universal Joint
This is a page from the M915A1 TM9-2320-283-24P manual, page 176, fig 80.
Is it part # 9 on the diagram? (Part # is 113660 or 5731402, which are both Eaton part #'s, NSN = 2520-01-148-5970).
If it is, I just cheked my spares, and unfortunately I only have one, and it is already broken.
Sorry I cant help, other than giving it a part #.
Look at TPUB at following address.
2520-01-148-5970 Yoke, Universal Joint
This is a page from the M915A1 TM9-2320-283-24P manual, page 176, fig 80.
Is it part # 9 on the diagram? (Part # is 113660 or 5731402, which are both Eaton part #'s, NSN = 2520-01-148-5970).
If it is, I just cheked my spares, and unfortunately I only have one, and it is already broken.
Sorry I cant help, other than giving it a part #.
Front tandem input yoke is a 1710. Can be replaced with spicer 6-4-6041x for full round or 6-4-6041-1x for half round
The yokes between the axles are mechanics style. They are not available anymore.
Front tandem rear output is replaced with 1710 round 6-4-8521X
Rear tandem input yoke 1710 full round 6-4-8541X or half round 6-4-8541-1x
Interaxle shaft will need a new slip yoke and end yoke.
The DS401p and RS401 were replaced by the DS/RS 451 Model axle and all parts will interchange
The yokes between the axles are mechanics style. They are not available anymore.
Front tandem rear output is replaced with 1710 round 6-4-8521X
Rear tandem input yoke 1710 full round 6-4-8541X or half round 6-4-8541-1x
Interaxle shaft will need a new slip yoke and end yoke.
The DS401p and RS401 were replaced by the DS/RS 451 Model axle and all parts will interchange
Last edited: