Mass Ownage
New member
- 46
- 0
- 0
- Location
- sulphur, LA
Anyone know where I can get a drive shaft for a Bobbed Deuce. Needs to measure 55" did a search and turned up nothing, but the search on my phone isn't always great....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Drive Shaft
- Thread starter Mass Ownage
- Start date
Ridgerunner
New member
- 791
- 6
- 0
- Location
- Holland, Mi
You'll have to get your drive shaft lengthened with a new longer tube, to the proper measurement. You can use either drive shaft. The one from the t-case to the middle axle or the one between the tandems. I get them done for around $130, and that includes high speed balancing.
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
Look up "machine shop" in your local area and call around to see who makes drive shafts.
- 26,246
- 1,179
- 113
- Location
- NY
OverSizeHeavyHauler
New member
- 95
- 1
- 0
- Location
- Memphis, Tn
Hey RIDGE.....pm me por faver....Im gonna need a longer shaft....
shannondeese
Member
- 651
- 18
- 18
- Location
- High Springs Fl
Look up High Angle Drivline-Call Jesse at 530-877-2875 He has made all of mine for me quickly and I've never had a problem with them. His name is Jesse. Tell him Shannon sent you and you're from steel soldiers and he'll cut you a good deal.