[3]Manual is a SMARPI 9-2320-209-14&P SPLIT AIR-HYDRAULIC BRAKE SYSTEM [/3]
[3](MODIFIED M44A2 2 1/2 TON SERIES TRUCK)[/3]
[3]and according to the Component Description<SPAN style="mso-spacerun: yes"> consist of the following items,[/3]
[3]1. Dual system hydraulic master cyl, mounting bracket,petal shaft support, [/3]
[3]and yoke replace previously used single system master cyl. and components[/3]
[3]2. Addition of a second and identical air-hydraulic booster mounted under [/3]
[3]cab on right hand side.[/3]
[3]3. Dual chamber air reservoir with separate draincocks replaces one of the [/3]
[3]two previously used single chamber air reservoirs.[/3]
[3]4. Brake warning lamp added to instrument panel.[/3]
[3]5. New air and hydraulic routing(lines, tubes, fitting, valves)and the [/3]
[3]wiring to facilitate interconnection of component items 1 thru 4.[/3]
[3]and the system operation is:[/3]
[3]A. The split air-hydraulic brake system on modified M44A2 series trucks [/3]
[3]provide two independent air and hydraulic for actuation of the truck service [/3]
[3]brakes. One system actuates the front steering axle brakes, while the second [/3]
[3]system actuates the forward-rear and the rear-rear axle brakes.[/3]
[3][/3]
[3]Nope, I don't have the manual. Wished I did![/3]
[3][/3]
[3][/3]
