Streetgliderx
New member
- 147
- 0
- 0
- Location
- Tuscumbia, AL.
Has anyone tried the new eBay jerry cans in the old mounts? Do they fit or function worth a flip?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
eBay jerry cans.
- Thread starter Streetgliderx
- Start date
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,129
- 113
- Location
- Athens, Ga.
If you're referring to the modern Scepter cans in the old mounts, they do seem to not fit properly. You can force it in but I assume modern jerry can mounting brackets are larger in the corners to accomodate the Scepters.
- 12,195
- 319
- 0
- Location
- gainesville, ga.
Mine seem to fit ok, no forcing, tight but drop in, the holders that will not allow a drop in I find that the corners are bent in, a 3lb hammer fixes that.
peashooter
Well-known member
- 1,038
- 205
- 63
- Location
- Hanover, minnesota
mine fit too, but I've had a couple of the used plastic Scepter cans that were bulged from use more than others and made a tighter fit the old mounts.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
Then Scepters fit just as well as the metal cans in the mounts. If you have bulged can, that's a different story.
- 4,210
- 37
- 0
- Location
- Las Cruces, NM
Man I hate it when my can is bulged. . . .
dslucas
Member
- 102
- 1
- 16
- Location
- Deputy Indiana
Usually happens as you get older 
rwminck
New member
- 71
- 0
- 0
- Location
- Florence SC.
The ones from over seas do not fit in a standard holder, at least the ones I have ordered. went to Satarn and ordered some of theirs. Not here yet, so I don't know if they fit?
Streetgliderx
New member
- 147
- 0
- 0
- Location
- Tuscumbia, AL.
I guess that was kinda broad question! This is the ones I'm talkin bout.
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
No idea on those cans. I only use USGI cans.
- 12,195
- 319
- 0
- Location
- gainesville, ga.
I have the big one of those NATO cans (can be had in three sizes), it fits just fine.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
That looks a lot like the Jerry cans made by Midwest. Except without that incredibly retarded epa approved "safety spout". Seriously, who thought these new gas can spouts were such a good idea they are mandatory!?
peashooter
Well-known member
- 1,038
- 205
- 63
- Location
- Hanover, minnesota
I'm not sure about all the new "NATO style" cans but I've read reviews on the ones sold by cheaper than dirt and they aren't very positive. Most complain of the interior "paint" flaking off into the fuel and many mentioned they arrived with rust inside (new cans). The real NATO cans have a nice porcelain coating inside...maybe some of the newer knockoffs do too but you might want to check before getting too many of them. I've bought quite a few new real NATO cans from Mills Fleet Farm (like a tractor supply store) here in Minnesota over the last year or 2 ($29-39 w/spout).... Before we become another state that mandates the CARB approved cans only.
- 5,359
- 3,356
- 113
- Location
- Lexington, South Carolina
Actually, the CARB requirement became federal law a couple of years ago (Thanks Kalifornia), so people are now selling them as 'ornaments' to get around the krazy KARB (usually by putting some small print to the effect 'not for fuel use'). YMMV.
peashooter
Well-known member
- 1,038
- 205
- 63
- Location
- Hanover, minnesota
I know the cans aren't illegal yet in all states (even when used for their intended purpose), but yes I have seen some cans that have "for water only" or some such language.
welldigger
Active member
- 2,602
- 15
- 38
- Location
- Benton LA
That's the trick to finding a useful gas can in general. Not just Jerry cans. Find "water" cans.