- 7,575
- 19,462
- 113
- Location
- Charlotte NC
I don't really know what they are called. I thought maybe they were Packard Connectors (the male end) but what I have here in a bag "ain't it". What I am doing is adding a second light on the back of my truck - both sides. Hoping to make up a "Y" off the factory harness, add a few inches of wire, and feed both lights off the original equipment wiring. Without hacking up the harness...
Surely there are the rubber pieces and the metal inside so wiring repairs could be made?
Pictures below:
![Light Connector 03.jpg Light Connector 03.jpg](https://www.steelsoldiers.com/data/attachments/563/563882-592da3d93e57227f76808bb5d0e78a2c.jpg)
![Light Connector 05.jpg Light Connector 05.jpg](https://www.steelsoldiers.com/data/attachments/563/563884-1e768ff66fb5ab36af1272ff01c38c17.jpg)
Surely there are the rubber pieces and the metal inside so wiring repairs could be made?
Pictures below:
![Light Connector 03.jpg Light Connector 03.jpg](https://www.steelsoldiers.com/data/attachments/563/563882-592da3d93e57227f76808bb5d0e78a2c.jpg)
![Light Connector 01.jpg Light Connector 01.jpg](https://www.steelsoldiers.com/data/attachments/563/563880-544ba9f6cf008aac7a13343548d4e1aa.jpg)
![Light Connector 02.jpg Light Connector 02.jpg](https://www.steelsoldiers.com/data/attachments/563/563881-419882829e1d36afb11c83b25f1ae295.jpg)
![Light Connector 04.jpg Light Connector 04.jpg](https://www.steelsoldiers.com/data/attachments/563/563883-8f01da03b364955a046b85e58165871c.jpg)
![Light Connector 05.jpg Light Connector 05.jpg](https://www.steelsoldiers.com/data/attachments/563/563884-1e768ff66fb5ab36af1272ff01c38c17.jpg)