• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Engine identification

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,245
10,180
113
Location
Papalote, TX
The easiest way for me to tell is look at the oil pump drive on the back of the motor (where a distributor would be on a chevy gasser) it should have a tach sending unit bolted to it, if the bolt holding it down is on the left (drivers side) it is a 6.2L if it is on the right it is a 6.5L, also look at the left valve cover, if it says GEP it is likely a 6.5L
 
Top