• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Engine splash guards

jmpogue89

Member
58
32
18
Location
Houston Texas
I can make duplicates of the splash shields if yours are damaged or missing. ......... The rubber matting is a little pricy. Its 1/8” thick. ...........
The rear shield on the driver’s side was missing, so I made it to protect as much as possible. If you do want them you will have to make your own holes because I believe they are all different due to there being an extra hole in the shield for the right front. I’m guessing it was stolen from another vehicle. C5F87468-0BCE-4586-A7BE-AC65D4AF428A.jpeg4A4831C6-11CE-4765-9966-7DEFD4CDE19E.jpeg703929D8-0853-4588-8E03-6571533F6AD3.jpeg06BBD77E-76B8-4DA6-93DB-7A18D6D5D670.jpeg
 

Attachments

Last edited by a moderator:

killjoy35

New member
5
1
3
Location
Davenport
I can make duplicates of the splash shields if yours are damaged or missing. ......... The rubber matting is a little pricy. Its 1/8” thick. ...........
The rear shield on the driver’s side was missing, so I made it to protect as much as possible. If you do want them you will have to make your own holes because I believe they are all different due to there being an extra hole in the shield for the right front. I’m guessing it was stolen from another vehicle. View attachment 787081View attachment 787083View attachment 787085View attachment 787084
PM sent
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks