• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Engine Stall

54
0
0
Location
XENIA OHIO
I just brought my m1028 home after 71 days of waiting for EUC. the only problem i have is ,when you rev the engine up some and let up on the petal
it will stall , what problem do i have.
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,758
113
Location
Monrovia, Ca.
Could be the idle is set too low. I think there is a dashpot on the throttle that holds the throttle a bit off idle during decel. Someone else with more CUCV knowledge will chime in. Could also be dirty dieselgas filters. Service it and see what happens.
 

bigmike

Well-known member
Steel Soldiers Supporter
2,005
356
83
Location
Dixon CA.
Be sure you have fresh diesel. My M818 wanted to stall each time I let off the pedal. I added some lucas to the tank and a fresh tank full of diesel and it went away quickly.
 
54
0
0
Location
XENIA OHIO
thank for all the help . i have put in fresh fuel with lucas additive in it.
I have a new filter to put in it ,just need time hope this clears up my problem .
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks