• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Ether can for M939 trucks?

sandcobra164

Well-known member
2,999
287
83
Location
Leesburg, GA
Those looking for the temp switch need to follow the line coming from the bottom of the either solenoid, you'll find it threaded into a water jacket. The solenoid will activate at any temperature but the valve will keep it from injecting into the intake manifold above certain temps.
 

D6c

Member
125
14
18
Location
IA
Looked at the wiring diagram again.....sure enough, it shows a "thermal switch" in the ether circuit....I'd overlooked it before.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks