• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Extra Power Feed Through Post?

HoveringHMMWV

Well-known member
Steel Soldiers Supporter
481
1,112
93
Location
AL
I have seen a few trucks on GovPlanet that have the multi stud power bus connected to a feed through post (usually covered in silicone). But I am also seeing what looks like a second feed through post next to it or even aft of the shunt. Does anyone know what it is for or what accessory might usually be connected to it? I was able to find the feed through in the TM's but they don't show multiples together.
Thank you,
- HoveringHMMWV

IMG_0077.jpg

IMG_0076.jpg
 
Last edited:

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,397
4,181
113
Location
Brentwood, Calif
That’s an additional ground stud, you will find it wired with a massive ground cable in the 400amp equipped trucks, it runs to the 400amp generator ground stud.
Its just a stud on a 200amp truck. I guess AMG a figured out that while they added a bunch of positive tie point, they forgot they should have negative too.
 
Top