spankybear
Well-known member
- 884
- 911
- 93
- Location
- WA
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Fast Axles
- Thread starter timberrrrrr
- Start date
timberrrrrr
Member
- 43
- 4
- 8
- Location
- Eugene, Oregon
Yes there are a few companies that come up when you do a google search that claim to have the parts. Unfortunately when you call them they say they don't have them and will have to look into it and call you back. After they do call you back (if you are lucky) they tell you they can't get them (even though they have pricing and everything on their site for the parts)
timberrrrrr
Member
- 43
- 4
- 8
- Location
- Eugene, Oregon
Left a message for Bryce in Florida a while back, no returned call
Anybody else have any other leads.
Anybody else have any other leads.
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
M810 differential is not what the LMTV's have. The FMTVS use the RF611 axle. I wish they did however as the M810 has a far better selection of ring and pinion ratios.
spankybear
Well-known member
- 884
- 911
- 93
- Location
- WA
The reason I posted the link to the m810 was the part number for the ring gear seem to be the same as the lmtv ... though it may be a source for cheaper used parts. I want to get the higher ratio gears and looking for options.
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
I spent an hour talking to Meritor tech support and that is the right part number, however he said that the vast majority of those diffs had the 3.70 ring and pinions. I did query him on the ratios less than 3.07.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
and what did he say on that?
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
Part numbers don't exist in their system. Meaning that the differential was designed to have those gears and a part number was assigned to them but no parts have been produced.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
Aernan
Member
- 510
- 19
- 18
- Location
- San Jose/California
I have found a few sites claiming to have the right and pinion. Lowest I saw was $1700 per diff. So I didn't verify stock.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Sent from my SAMSUNG-SM-G930A using Tapatalk
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
They likely do not and are just displaying Meritor's part information. Last I talked to Meritor, which was about 4 months ago, the R&P is a good part number with no stock and 3-6 months to have manufactured.
Aernan
Member
- 510
- 19
- 18
- Location
- San Jose/California
It would be nice if we could figure out what the merritor part numbers are for the 2.90 ratio if we need to get them manufactured and wait.
- 464
- 267
- 63
- Location
- Seville, OH
Maybe we should organize a group buy?
Aernan
Member
- 510
- 19
- 18
- Location
- San Jose/California
yertnamreg
Member
- 92
- 21
- 8
- Location
- Houston TX
Do it! I would think we have enough people needing these to convince the business guys at Meritor to crank some of these out.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
lol..... business guys at Meritor work with manufacture numbers of many many thousands.... even 50 may well just be laughable to them.... but one does not know for sure without trying
yertnamreg
Member
- 92
- 21
- 8
- Location
- Houston TX
Hahaha, you're not wrong. Just let me dream of those sweet sweet gears
Aernan
Member
- 510
- 19
- 18
- Location
- San Jose/California
I used to work as a machinest. At first glance the gears look pretty standard. I think the pinion is the most compress to cut. I'll go to some cost estimates.
Anyone know what kind of steel they use? I'm guessing medium carbon or high carbon with additives for long wear with heat treatment.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Anyone know what kind of steel they use? I'm guessing medium carbon or high carbon with additives for long wear with heat treatment.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Aernan
Member
- 510
- 19
- 18
- Location
- San Jose/California
ok a little search turns up there are companies specializing in making replacement gears and custom gears.
http://www.rushgears.com/
http://www.rushgears.com/
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
there gears look might small...... but maybe you talked to them already?
here is one of several others listed for custom automotive ring and pinion gears that have heard mentioned in the 4x4 world pretty often https://www.usgear.com/