Fdc physical removed, how to adjust fuel?

[Cummins_12v]

Fdc physical removed, how to adjust fuel? With the hex nut in the back of the pump?

 

[NMCShooter]

http://www.steelsoldiers.com/deuce/53010-how-turn-up-fuel-pictures.html

 

[gimpyrobb]

"Physically" removed? Why?

 

[Cummins_12v]

"Physically" removed? Why?

As i read in the post above, i have a non fdc "g" pump. That explains a litle more.

 

[drgreg]

Replacement pumps come without the FDC. I did not pay attention to where the adjustment was on these.

 

[rlwm211]

Jatonka has the manual for all the IPs for the deuce LDT engines including the G model.

There are illustrations and information as to how to turn up your fuel.

I hope you have your EGT gauge installed.

RL

 

[Cummins_12v]

Do you have a link, nope, no pyro yet. But im not going over 10-12psi. For now the boost was max 6psi

 

[rlwm211]

www.jatonkam35s.com in the deuce technical manuals section near the bottom of the llist.

RL

 

[Cummins_12v]

www.jatonkam35s.com in the deuce technical manuals section near the bottom of the llist.

RL

The fuel is now adjusted so it makes 10 psi max at 5th gear. I should be safe for now without a pyro. It runs much better than on 6 psi