panzerwillie
Active member
- 992
- 166
- 43
- Location
- miami florida
Its going slow , but moving the Ferret to my house in the next few weeks , will have more time for it , when time allows me to...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ferret Engine
- Thread starter panzerwillie
- Start date
datadawg
New member
- 253
- 4
- 0
- Location
- Bucks County, PA
Bump. I am curious to see how this turned out. The Ferret transfer box takes power from the transmission and splits it to left and right sides, where prop shafts send power to bevel boxes at each wheel. You have 4 bevel boxes that need to be
powered. I am struggling to see how you will make this work. Here is a schematic of the Ferret driveline, courtesy of this website: http://www.ferret-fv701.co.uk/usfulinfo/transmission_layout.gif
Number 5 in the photo shows the transfer box and number 2 shows front bevel boxes. The prop shafts run inside the driving compartment! Sorry, I could not imbed the picture.
powered. I am struggling to see how you will make this work. Here is a schematic of the Ferret driveline, courtesy of this website: http://www.ferret-fv701.co.uk/usfulinfo/transmission_layout.gif
Number 5 in the photo shows the transfer box and number 2 shows front bevel boxes. The prop shafts run inside the driving compartment! Sorry, I could not imbed the picture.
Last edited:
panzerwillie
Active member
- 992
- 166
- 43
- Location
- miami florida
other peojects
Have not touch it for a while with other things going on.....
Have not touch it for a while with other things going on.....