• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Few pics of my goat project

Al Capone

Active member
358
38
28
Location
Pearl river la
Yes this one was the one off Craigslist in New Orleans a few months back . Not crazy about roll bar setup but it would do its job if it every rolled over somewhat . Have any of y'all ever rolled a vehicle off-roading ? I have rolled my jeep on side couple times . Recently on passenger side hard and roll bars work . If new buyer wants roll bar off then he or I can remove it . I would not have made one for this vehicle but it's already on there so not messing with it .
 

combat32

Well-known member
1,639
106
63
Location
Booneville AR.
Well we are all just purists here, that's all no offense meant.

We prefer original over modifed, it's coming along nicely and if you are selling anyway nothing wrong with letting the next owner make the call.

I have not rolled one, nor do I wish to get into a position where I might.
 
Last edited:

Al Capone

Active member
358
38
28
Location
Pearl river la
Finally got pto lever in from art and checked it all out and winch works . Now need cable . Took it on its maiden voyage around the neighborhood did good . Speedo don't work . Crap . Now gotta pull console probably to change cable . Will disconnect from speedo first to see if it's speedo .
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks