Finally found something that does not work on M925A2

[porkysplace]

This is not related to the temp switch from my other thread.

It's not related to the ether system not working ? This thread most likely will get merged to the other thread as they are related . Keeping all the information in one thread helps diagnose the problem for you and future users.

 

[R Racing]

Looking at picture 3 and 4 to the right side of the little center part on the end by the threads is a compressed brass filter. looking at yours its plugged up. try soaking it in carb cleaner or mineral spirits for a day or 2 then try compressed air to see if it works.

 

[plainside]

Thanks! and that small hole is in the stepped part? It looks like 2 holes, on the each side of the stepped piece and not on the end like you say.

 

[R Racing]

Yes the 2 holes are on the opposite end . But the Ether has to go thru the filter to get to the 2 holes.

 

[plainside]

Yes, I see the filter, now time to try clean this thing up! Thanks!

 

[plainside]

Works great now.