Floorpan replacement

[Devlin]

Hello everyone, I just got an 84 M1009 on Saturday and floorpan and rockers are rusted out. I've read a good bit on here that the LMC replacement ones are not perfect put will work. I just wanted to ask if anyone had any other recommendations before I order them. Thanks a lot. Here is a picture of it. It is the only picture I have at the moment.

 

[nyoffroad]

Most all aftermarket rust panels are about the same, check with a local body shop and see where they get AM panels I bet you'll get them cheaper and faster.

 

[Devlin]

Most all aftermarket rust panels are about the same, check with a local body shop and see where they get AM panels I bet you'll get them cheaper and faster.

Thanks nyoffroad I will call around tomorrow and see what they can come up with.

 

[nyoffroad]

Oh yeah get the FULL rockers not the slip-on also plane on the rocker reinforcement or inside rocker.

 

[Devlin]

Oh yeah get the FULL rockers not the slip-on also plane on the rocker reinforcement or inside rocker.

Yeah I was already planning on inner and outer rockers, the full ones. Thanks again