Flu 419 Oil filter assy, washer was on top of the o ring?

[Mittzlepick]

So i assume the aluminum washer is for the filter bolt but there was one on top of the oring that should go on the top of the filter. Unkess tgats also in the wrong spot(doubt that as no seal for the top otherwise) any help would be apreciated.

 

[Guyfang]

When you ask the same question in two or more threads, its hard for folks to keep up with you. Look at the other thread.

 

[Mittzlepick]

Thanks thought first try didnt post.