Another Ahab
Well-known member
- 18,000
- 4,556
- 113
- Location
- Alexandria, VA
They don't really look so ugly. They just look functional, and that's all good.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FLU419 SEE HMMH HME Owners group
- Thread starter Migginsbros
- Start date
- 3,342
- 1,329
- 113
- Location
- The actual midwest, NM.
What surprised me is that they still make them. Or are they used/NOS?
And you must've done some rewiring to separate the blinker from the brake light.
patrol578
Member
- 107
- 22
- 18
Last edited:
Another Ahab
Well-known member
- 18,000
- 4,556
- 113
- Location
- Alexandria, VA
What went out there?
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
Is that a replacement operator's seat on the backhoe station? I need to change out that seat on both my SEEs
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
I saw this on the net today. Location kinda looks like the "actual Midwest" . Hmmmm
I'm curious how this thing gets around
- 3,342
- 1,329
- 113
- Location
- The actual midwest, NM.
See that little coupler near the engine? Those things only get around by being towed. As in Fort Towson.
Never seen one in real life - they must all be in the so-called midwest.
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
patrol578
Member
- 107
- 22
- 18
That thing right in front of the camera, that goes out second? That's the very topic of this thread...an FLU419!
The windshield is protected by cardboard, and the FOPS may have been removed, but the work lights and Schmidt FL4 are unmistakable.
I wonder who "won" this one at auction?
Speedwoble
Well-known member
- 606
- 301
- 63
- Location
- New Holland, PA
I am pretty sure my first Flu, with the non-op transmission, had been used for sling or airdrop practice as it had tape marking points showing the CG, and front and rear weights. Too bad I sold off the loader, or I would see if it had those numbers on the loader arms.
Migginsbros
Well-known member
- 2,206
- 6,711
- 113
- Location
- Berlin-Germany
Migginsbros
Well-known member
- 2,206
- 6,711
- 113
- Location
- Berlin-Germany
We purchased them new. They always listed as Manufacturer: Hella 2SD001685-211 Diameter 5,5 inch. For use on Mercedes LP- Typ 1969-77 for example.
That´s right, we seperate the blinker. In my memory i take the turn signal line from the fuse box and use the black out lines to go to the rear light.
Edit: Perhaps I used the turn signal line as it is and go from the brake switch to the black out line to get the power at the rear.?! Sorry I will get the front hood off to come into mind.
Last edited:
anthkey
Member
- 98
- 7
- 8
- Location
- Cumming ga
I bought one at northern tool for @$100
anthkey
Member
- 98
- 7
- 8
- Location
- Cumming ga
I bought one at northern tool @$100
- 3,342
- 1,329
- 113
- Location
- The actual midwest, NM.
Did you already forget about those seats from Surplus Center? As I recall they were about $20 a piece, which is why I bought two...shipping on one would've doubled its price.
And, no, I haven't tried to install one yet. It's four bolts, how hard could it possibly be, even if the pattern doesn't match?
anthkey
Member
- 98
- 7
- 8
- Location
- Cumming ga
I bought one at northern tool @$100
Another Ahab
Well-known member
- 18,000
- 4,556
- 113
- Location
- Alexandria, VA
Air drops don't ALWAYS go so good.
I wonder if that FLU made out OK?!
The vocabulary in this vid is a little rough at the edges, and hope maybe there's a mod here somewhere who knows a way to mute that or something (because the vid shots are REAL entertaining):
https://youtu.be/kjF8ju7YeLI
Last edited:
Migginsbros
Well-known member
- 2,206
- 6,711
- 113
- Location
- Berlin-Germany
Today we got the rear wheels back. Pic of the vertical tire mashine, sorry without a wheel.
We changed the oil from the wheel gears as we find out (after years) it is easy without the wheel.
After all we are satisfied done some work in front of the next meeting. In about 10 days we go for excarvating in a gravel pit .
We changed the oil from the wheel gears as we find out (after years) it is easy without the wheel.
After all we are satisfied done some work in front of the next meeting. In about 10 days we go for excarvating in a gravel pit .
patrol578
Member
- 107
- 22
- 18
Yeah, I've seen that one. That was an expensive day.
patrol578
Member
- 107
- 22
- 18
Well, I got her running again (after nearly two weeks). It was all about those copper crush washers. I ended up cleaning and lightly sanding both faces of each one, replacing a few with deep nicks.
When the engine finally caught, it was obvious that the leaks were gone. Runs like a champ now!
When the engine finally caught, it was obvious that the leaks were gone. Runs like a champ now!