I finished the horn Install. That has got to be one of my favorite upgrades yet. It brings a smile to my face every time I push the horn now. No more old VW Bug sounding horn.
It has a good tone to it, not Extremely Crazy loud but VERY loud.
Here are some pictures and a parts list. I know some people wont like the push connectors I choose but they are so much easier and if there is a problem I installed a valve that can turn it all off very easily.
Here are all the parts for it laid out. Obviously the hoses will be longer and I'm also installing an air chuck.
The parts are fro McMaster the horn is from flea bay.
I modified the existing horn mount by drilling one extra hole because the original hole spacing was to wide. Then I cut the old hole off to clean up the bracket.
Drilled a couple holes in the storage box and mounted it after it was all painted.
Here you can see the air line. Another great part is you don't have to do anything with the wiring except un plug the old horn and plug in the new one.
I removed the 1/2" pipe plug from the tank closest to the front for the air source.
After everything was installed I did pressure tested it and leak checked all the joints with soapy water. Everything passed.
Also You may notice I didn't put any kind of pressure regulator on it! Keeping it simple and from some good advice from another member, I decided not to.
Thanks for all the words of wisdom from the people that helped out.
