• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

FMTV LVAD soft top

AlexS

New member
5
0
1
Location
Wisconsin
I own M1094 which is a LVAD dump truck and was thinking it would be cool if anyone made a soft top for the cab, like an M35. I looked all over the interwebs and nothing showed up. I figured if anyone did something like that this would be the place.
Thanks
 

wheelspinner

Well-known member
Steel Soldiers Supporter
3,743
1,504
113
Location
North Carolina - FINALLY !
There isn’t, but I sure had that on my to-do list. Plan was to cut the entire top section of the roof off, leaving the perimeter for a “framework“. Then just make or have made a top out of old cargo cover ( I have a bunch)
 

AlexS

New member
5
0
1
Location
Wisconsin
There isn’t, but I sure had that on my to-do list. Plan was to cut the entire top section of the roof off, leaving the perimeter for a “framework“. Then just make or have made a top out of old cargo cover ( I have a bunch)
Yea that’s a good idea. I was more thinking kind of like a “Jeep” soft top where it encompasses the whole top minus the windshield and top of the doors. Maybe a boat cover specialist could accomplish such a feat.
 

NDT

Well-known member
Steel Soldiers Supporter
10,106
5,703
113
Location
Camp Wood/LC, TX
I was also contemplating this. Two “hoop” bows at the b and c pillars, and a “bikini” top that is basically a square piece of vinyl attached to the windshield and attached to the two bows.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks