FMTV Wheel Pneumatic Valve Stem Seal/Gasket

[TomTime]

Putting new tires on. While wheels are a part going to blast and paint wheels. When I took the valve stems out of the wheel I found that the seals or gaskets have degraded and need to be replaced. I look in the parts TM (FMTV M1083A1) and it just shows the valve stem (#33) with the seal on it but doesn't give a part number for the seal. I'm going to need new seals before I can reassemble the wheels back together.
I looked on line but could not locate any information on them or find a part number.
Can these seals be purchased and if so where? Is there a part number for the seal? Is there a replacement seal available? Any help would be greatly appreciated!

 

[coachgeo]

see parts spread sheet pinned/stuck to the top of this page.... under wheels... believe what your looking for there is called a valve stem grommet. Link provided there.

 

[TomTime]

see parts spread sheet pinned/stuck to the top of this page.... under wheels... believe what your looking for there is called a valve stem grommet. Link provided there.

Was looking under CTIS and Other in the spreadsheet.

Many thanks!!!

 

[coachgeo]

Was looking under CTIS and Other in the spreadsheet.

Many thanks!!!

my bet it is this one

Grommet

www.haltec.com

 

[coachgeo]

... valve stem (#33) mmm

Am curious.... can you please shoot a pic of the end of your valve stem (where the valve core goes in). and if there is any numbers on it anywhere..... post that here.

 

[TomTime]

my bet it is this one

Grommet

www.haltec.com

Okay, I’ll give that a try.

Again, many thanks!