• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Four pin plug in to 11 pin plug (pic)

wilfreeman

Active member
1,082
7
38
Location
Richburg, SC
I found a spare vehicle side plug in my parts trailer, so I am going to go ahead and make up a semi permanent 4 wire --> military plug. Thanks for all the info Tim
 

wilfreeman

Active member
1,082
7
38
Location
Richburg, SC
I tried my new wiring harness out today. I ended up using the butte connector to military plug pin method, as the 2 military vehicle side plugs I had were too far gone. The turn signals were great, but the parking and brake lights were very dim - too dim to use safely. I know it is supposed to be for temporary use, but I just went ahead and used the towing lights instead. The trailer side plug I used was an old one, so I'm not ruling out bad wiring, plus I've been sick the last 5 days, so I'm not ruling out user error! I'll try it again tomorrow if it's nice outside. I still want to mount a military (vehicle side) plug in my bumper and the pintle where the license plate is.
 

mitchdaly

New member
11
2
1
Location
Baldwin, MD
Trailer wiring

Got a question about the wiring for a trailer. I got another MEP-003A on a trailer this week and need to go pick it up at Meade. Got the pintle hitch already. My assumption is that the wiring for all trailers is the same as I have been reading in this thread, whether its a generator or an 1102. Am I correct? Want to make up an adapter to my 7 pin rv connector on my truck and have an extra plug ready to go with the wires and bullet connectors. Any help will be appreciated.
 

quickfarms

Well-known member
3,495
25
48
Location
Orange Junction, CA
how bright the existing military tail lights are will depend on weather the trailer has bulbs, as most do, or led's. The military led's work on 10 to 30 volts.
 
Top