comdiver
New member
- 295
- 1
- 0
- Location
- Buffalo NY
Eastern Surplus has a deuce on their site that belongs to Fred G. Does anyone know him or how to get an email to him? He has done some neat things to the truck and I have a few questions.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Fred G's deuce
- Thread starter comdiver
- Start date
joec
New member
- 787
- 1
- 0
- Location
- Vincentown,NJ
RE: Fred G
In touch with Dave of Eastern Surplus or Fred?
In touch with Dave of Eastern Surplus or Fred?
comdiver
New member
- 295
- 1
- 0
- Location
- Buffalo NY
RE: Fred G
I emailed Dave, but he doesn't have a email address for Fred. I did find out his name is Fred Galagher. He has done some interesting things to his deuce. If you know him or how to find him please let me know.
I emailed Dave, but he doesn't have a email address for Fred. I did find out his name is Fred Galagher. He has done some interesting things to his deuce. If you know him or how to find him please let me know.
Angus1
New member
- 388
- 0
- 0
- Location
- Freeland,Pa
RE: Fred G
I would like the see pictures of said deuce.
I would like the see pictures of said deuce.
comdiver
New member
- 295
- 1
- 0
- Location
- Buffalo NY
RE: Fred G
http://www.easternsurplus.net/customer.html
Fred G. ( Note: Hydraulic pump powering power steering and hydraulic motor to drive winch, this truck also has a propane injection system)
http://www.easternsurplus.net/customer.html
Fred G. ( Note: Hydraulic pump powering power steering and hydraulic motor to drive winch, this truck also has a propane injection system)
DaveP
Active member
- 1,681
- 3
- 38
A welded pitman arm? no thanks.
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
I dont see a shear pin on the winch shaft.............
MikeON
Member
- 134
- 12
- 18
- Location
- Lucinda PA
I'm also interested in hydraulic winch setups, so found this thread and I followed the link to the pictures of Fred G's truck on Eastern Surplus. After a quick look at the pictures, I realized this winch is in my garage right now!! 
I first noticed the fairlead rollers to guide the cable. I then compared the pictures right down to the details of the winch and other components, even the welds on the torsion arm below the winch. It's the same winch. I had gotten the winch, pump, valves, hoses, mounts, etc. from ebay:
http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWN:IT&viewitem=&item=220200585479&rd=1
As I didn't get the frame extensions to mount the winch, I asked the ebay seller where the rest of the truck was. He said it went to a scrap dealer. Hopefully it will be rescued by someone. The seller is an import car dealer and had gotten the deuce in a payment dispute.
I got a PTO on a previous ebay auction, and would prefer to mount the pump to it so I can disengage the pump as well as have two speeds. (My deuce already has Air-O-Matic steering). Also got a winch driveshaft from yet another auction just in case.
Regarding the lack of a shear pin, equal protection can be had with a hydraulic relief valve
I first noticed the fairlead rollers to guide the cable. I then compared the pictures right down to the details of the winch and other components, even the welds on the torsion arm below the winch. It's the same winch. I had gotten the winch, pump, valves, hoses, mounts, etc. from ebay:
http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWN:IT&viewitem=&item=220200585479&rd=1
As I didn't get the frame extensions to mount the winch, I asked the ebay seller where the rest of the truck was. He said it went to a scrap dealer. Hopefully it will be rescued by someone. The seller is an import car dealer and had gotten the deuce in a payment dispute.
I got a PTO on a previous ebay auction, and would prefer to mount the pump to it so I can disengage the pump as well as have two speeds. (My deuce already has Air-O-Matic steering). Also got a winch driveshaft from yet another auction just in case.
Regarding the lack of a shear pin, equal protection can be had with a hydraulic relief valve