Front axle u joint replacement

[m38inmaine]

I have a bad u joint on the front left on the 882. Never had one of these hubs apart and curious how much of a job it is to get the axle out?, and perhaps a basic step by step how it comes apart.

Thanks

 

[doghead]

I've done a few, a few years back on civy dodges.

Pull the wheel, brake caliper, hub and spindle. The spindle may require a puller. (the last cucv I did, did not need a puller).

Once all that is out of the way, the axle should just pull out.

Not all that hard to do.

 

[Bob H]

from the -34 TM

 

[m38inmaine]

Thanks, I'll order up the u joint and get at it. With all this snow and ice the old 882 is getting a work out.