Front Winch Part Identification

[fkowalski1942]

Hello Guys,

I´m installing the front winch on my Deuce and i´m stuck with the PTO and the lever parts, can anyone let me know where the part showed in the attached picture is bolted on?

Second question, my PTO has the accessory drive(to fit a power shaft to the rear of the truck), how it works? How the accessory drive is engaged?

Best Regards!

 

[doghead]

That bracket attaches to the side of the master cylinder. The lever pivots in the J shaped end of that bracket.

Additional linkage is needed for the rear output.

 

[jamawieb]

That bracket attaches to the side of the master cylinder. The lever pivots in the J shaped end of that bracket.

Additional linkage is needed for the rear output.

That's it, just hold it up to the master cylinder and 2 holes will match up. Also, it does need additional linkage to work the rear PTO.

 

[hndrsonj]

The parts TM will actually show an exploded view of what you are supposed to have.