WhoMe08721
Active member
- 191
- 123
- 43
- Location
- Bayville/NJ
Hey Guys,
Is there any trick to remove Cannon Plug on protective control box Under hood by windshield wiper fluid. My plug is corrode and frozen pretty bad. I have been spraying it down with penetrate oil for the last 2 days. I have tried channel locks and vise grip but no luck. I have also tried heating it from a heat gun cause I was scarred to melt the inside with a torch. Was thinking of trying a Jeweler's mini torch. But need to watch the heat and take my time trying not to melt anything inside Cannon Plug.
![Cannon Plug.JPG Cannon Plug.JPG](https://www.steelsoldiers.com/data/attachments/645/645718-0621773b147077d6e1079aa44e8e3c0f.jpg)
Is there any trick to remove Cannon Plug on protective control box Under hood by windshield wiper fluid. My plug is corrode and frozen pretty bad. I have been spraying it down with penetrate oil for the last 2 days. I have tried channel locks and vise grip but no luck. I have also tried heating it from a heat gun cause I was scarred to melt the inside with a torch. Was thinking of trying a Jeweler's mini torch. But need to watch the heat and take my time trying not to melt anything inside Cannon Plug.
![Cannon Plug.JPG Cannon Plug.JPG](https://www.steelsoldiers.com/data/attachments/645/645718-0621773b147077d6e1079aa44e8e3c0f.jpg)