Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Is it required to remove the whole assemblies to change the filter elements? This is what the TM says. it seems it could be done while the heads were still installed on the engine.
Make sure you are parked somewhere that you dont care about getting diesel all over. You will spill a lot. Put some towels & a 5 gallon bucket underneath them when you change them.
The canisters have drain valves, drain first and it's nothing to it....sort of like a spin-on, but with a bolt on top. The gaskets are much happier if the canisters aren't turned while tightened, like the oil filter canister/gasket situation.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!