Barrman
Well-known member
- 5,266
- 1,782
- 113
- Location
- Giddings, Texas
Sermis, Pistolnut and I did some fuel tank swapping over the weekend. I got the left overs since my Gasser isn't supposed to have the in the tank pump setup. Pistolnut now has a clean straight tank with a pump that works. I ended up with 2 pump assemblies that don't work and 4 fuel level senders.
I haven't started on the pumps yet, so no questions about them so far.
One of the senders is frozen up and not worth messing with.
The other 3 move.
One of them shows 85 Ohms no matter where the arm is.
Another shows 183 full up and 7.5 all the way down.
The third one shows 35 in all positions.
I assume the one that actually changes is right. Do those readings match up with what is supposed to be?
Thanks.
I haven't started on the pumps yet, so no questions about them so far.
One of the senders is frozen up and not worth messing with.
The other 3 move.
One of them shows 85 Ohms no matter where the arm is.
Another shows 183 full up and 7.5 all the way down.
The third one shows 35 in all positions.
I assume the one that actually changes is right. Do those readings match up with what is supposed to be?
Thanks.
