• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Fuel Tank Assistance?

Elijah95

Certified Rookie
1,239
1,183
113
Location
Georgia
Hey guys, I have one of these 600 gallon fuel tanks mounted on an M1061A1 as a dispenser rig, and I’ve searched and found a thread years ago about rebuilt parts for the valve below. I can’t find the thread again (improper keywording on my part)

This lever on top actuates the fuel valve on the bottom, allowing fuel to flow out and frequently the seals dry up and begin leaking.

Can anyone assist?


Sent from my iPhone using Tapatalk
 

Attachments

snowtrac nome

Well-known member
1,674
137
63
Location
western alaska
they are a standard 2 inch mechanical internal valve you would find on a tanker truck if you want a full rebuild you need to find a manufacture on it most likely it would be a Morison. Usually the only thing that leaks are the o rings in the cross shafts, and for diesel you only need a butyl rubber o ring if you are despising gasoline you might want to use nytrol o-rings
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks