• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Fuel tank missing

OutpostM37

Member
76
50
18
Location
Goldfield, Az
Fill hose from truck filler to the gas tank. Check diameters, I had to go to the muffler shop for a steel piece that was the size of the truck metal filler to the tank filler diameter. I purchased the rubber gas hose that fit the gas tank on mine.
On mine, I fab'd up two metal straps to bolt from the frame front of the tank, to the back frame member.
Fuel sending unit and wiring: I used a new M37 sending unit to match the gauge on the dash as far as Ohm resistance.
I had to make a round locking ring for the fuel sending unit to seat and seal into my tank. My tank is the S10 20 gallon. Not sure the opening on the 22 gallon tank.
Fuel lines (rubber 5/16" and 1/4" vent line on the tank.
Don't forget a good ground strap, mine is the woven one.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks