UncleSam
New member
- 58
- 3
- 0
- Location
- Anniston Alabama
In the TM -20 pg 4-31, does the #15 Ign Fuse or #17 Eng Control Fuse control the GP module on M1009?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Fuse to the Glow Plug Module
- Thread starter UncleSam
- Start date
Fuse #17 - Engine Control - Feeds circuit #39G
It Supplies power to the GP Controller Card under the dash and the pink hot wire at the relay. The GP Relay is supplied power directly from the 24v Terminal Block or the 12v Terminal block if the resistor pack has been removed.
It Supplies power to the GP Controller Card under the dash and the pink hot wire at the relay. The GP Relay is supplied power directly from the 24v Terminal Block or the 12v Terminal block if the resistor pack has been removed.
Attachments
UncleSam
New member
- 58
- 3
- 0
- Location
- Anniston Alabama
Thanks!!!
I took the day off today so I can have 4 day weekend soooo you know I'll be doing.........
I took the day off today so I can have 4 day weekend soooo you know I'll be doing.........